CidalTek W11

Hydrogen Peroxide with Silver Nitrate Solution

• Broad Spectrum: Bactericidal, Fungicidal, Yeasticidal, Pseudomonacidal, Tuberculocidal, Virucidal & Sporicidal

• For Consulting Rooms & Dressing Rooms: Use a 10% solution to wash floors & other surfaces, covering
corners & other inaccessible areas. Allow to dry. For optimum effect, keep the floors wet for a minimum of
30 mins.
• For Operation Theaters & Critical Care Areas: Use a 20% solution on wet surfaces of tiled walls, trolleys,
operation tables & floors evenly. Low-pressure sprayers have optimum efficacy. Close the room & allow
it to dry for 30 mins.
• Fogging: Calculate the room volume. For a 1000 cubic ft area, use 1 ltr of 20% diluted solution. Cover all
the electrical & humidity-sensitive equipment with protective polyethene sheets. Switch OFF the AC/AHU
before fogging. The fogging machine should be mounted 2 ft from the floor level. The angle of the
fogger is kept at approx. at 45°. Adjust the flow rate to the minimum. Close the doors of the room under
fogging & put a status tag “ROOM UNDER FOGGING, DO NOT OPEN”. 1 ltr of the solution will take
25 mins for fogging. Perform high-end cleaning with a 10% solution after fogging with AC switched ON.
The room area will be ready in 60 mins.

• Surface & Environmental Disinfectant & Concentrate
• Sporicidal Fogging Solution
• Non-critical medical device disinfection

Each 100 ml Contains:
Stabilized Hydrogen Peroxide 11% w/v
Diluted Silver Nitrate Solution 0.01% w/v
Purified Water IP Q.S.